Studio 7

THE LEGEND LIVES
Physics, engineering, innovation and a deep-rooted love of music have been the soul of FRIED products for over 30 years.

Now, FRIED Products is pleased to introduce another step in the evolution of the reproduction of true sound; the FRIED Studio 7, a 3-way floor-standing dual transmission line loudspeaker that sets a new standard in performance and value.

 

NO BUZZ. NO SMEAR. NO BOXINESS.
For reproduction that is clean and uncolored, free of the buzz, smear, and boxiness that come through most loudspeakers—even the most expensive—no other product surpasses Fried.

Soundly built of high density materials with extensive cross-bracing, the Studio 7 utilizes the latest evolution of our Free-Flow© transmission line: a passageway leading from the rear of the bass driver to a line folded three times vertically; tapering to vary the cross-sectional area, and terminating at the bottom front of the enclosure. This passageway is damped using the latest technology in open cell acoustical foam and other damping materials to provide a smoother and more effective cut off of unwanted frequencies emitted from the transmission line. The result is dramatically improved clarity and dynamics. The Studio 7’s midrange also utilizes a transmission line using these same advanced technologies—together they produce a sound that is amazingly true and totally free of distorting back waves.

Each time cue from the original performance comes through delivering enhanced instrumental timbres, spatial placement, and the unique ambiance of the recording site. At the very lowest frequencies, the air in the line couples with the bass driver to effectively create an enormous piston. The result is an effortless presentation—articulate, timbrally accurate and truthfully recreating the power and majesty of the original event.

 

DRIVERS WITH DISTINCTION
The Studio 7 utilizes a trio of highly advanced drivers sourced from Danish Sound Technology. Our 8" and 6 1/2" drivers are engineered to ensure an effortless portrayal of the most dynamically contrasting sonic landscapes. The careful design of geometries and materials yields a stiff cone yet retains smooth upper-frequency roll-off characteristics.

Both drivers feature motor systems with vented voice coils, NRSC cone geometry, low damping rubber surrounds, damped dust caps, magnesium free flow cast baskets, and inductance-reducing shorting rings. The totality of the design results in timbral accuracy, maximum dynamic linearity, enhanced resolution, and reduction of harmonic product generation.

The treble unit is a 1", dual concentric ring with wave guide center plug. Considered to be one of the finest tweeters in existence, it features outstanding dispersion and extended response to 40kHz. When combined with our midrange and woofer drivers, maximum coherence, seamlessness and resolution are obtained.

 

UNPARALLELED CROSSOVER
The crossover is first order series in the Fried tradition. Leaving absolutely nothing to chance, the networks feature top of the line perfect-lay air core inductors and polypropylene film capacitors throughout, a feature normally reserved for the most expensive applications. Properly implemented series networks provide superior driver coherence, increased dynamic range and introduce a Doppler effect similar to live music that increases the sense of realism. Fried’s execution of this topology produces a 3-way loudspeaker with the intimacy and seamless nature of the best mini-monitors, while retaining the dynamic capabilities reserved for larger multi-way systems.

Because of the use of our specially designed drivers and true transmission line loading, the Studio 7 is a highly “non-reactive” load that is inherently easy to drive and mates beautifully with all amplifier topographies ranging from 10 to 300 watts.

 

YOU ARE THERE
The Studio 7 is designed to portray every nuance of a musical performance, delivering an astonishingly real quality. Voices and instruments appear in their true spatial positions, with accurate and distinctive timbres. The total sound field is spacious and deep. The reproduction of orchestral dynamics is exquisitely vivid revealing soft sounds as well as high peak levels at any frequency. The FRIED Studio 7 stands ready to transport you to the scene of the original performance. Be there.


 

 

 


STUDIO 7 UNIT SPECS

Dimensions:
43 1/2" H x 11" W x 20" D

Shipping Weight: 125 lbs. each

Crossover Point: 180Hz, 2kHz

Finish: Walnut, Maple, Cherry
Finishes available via special order:
Mahogany, Rosewood, Black Ash

Drivers:
1" Dual concentric ring tweeter
8" and 6 1/2" Woven Glass
Fiber Cones, magnesium free flow
frame, vented pole piece.

Sensitivity: 90 db.

Impedance: 4 ohms

Frequency Range:
+/- 3 db. 25Hz - 22kHz

Recommended Amplifier
Power:
10 - 300 watts
per channel

Input Facilities:
5-way gold-plated
binding posts

Warranty:
Five years, limited

Product specifications subject to change.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

Fried Products Corporation
Post Office Box 680 · Gladwyne, PA 19035 · 610-649-8774
info@friedproducts.com · www.friedproducts.com

©2004 Fried Products Corporation. All rights reserved.